|
|
Posted by Chris Case [63.199.241.132] on Monday, January 31, 2011 at 21:24:33 :
In Reply to: Re: One picture shows the bottom and the other shows the top posted by Kaegi [71.227.129.92] on Monday, January 31, 2011 at 00:41:52 :
According to the interchange manual, the way to tell is whether there is a notch cut in to the housing to clear the bigger gear.
The set screw sounds so much more surer, being unique to the big gear, as opposed to a notched housing that may have been subsequently changed back to small gears.
Follow Ups: