|
|
Posted by Will (in IL) [98.215.26.138] on Wednesday, January 26, 2011 at 16:33:45 :
In Reply to: Re: I love the vise on the back posted by Jerry in Idaho [64.139.238.43] on Tuesday, January 25, 2011 at 19:32:42 :
Well, I didn't have the necessary pipe to bult the Vice stand, but did notice I still had my old drop hitch. So I used some scrap and fabricated a receiver mount. Need to purchase and install the larger bolts, and fabricate one more leg for the rear most bolt hole of the vice, but the height off of the rear of the M works well.
I also tool an old Ranger Disc Rotor and a broken M axle and made a stand for the Bench Grinder. No no more bending down to use it.
Will
Follow Ups: