|
|
Posted by Tim Holloway [69.54.28.229] on Tuesday, January 25, 2011 at 20:23:25 :
In Reply to: Re: Need help removing a headligh bezel posted by gmharris [71.105.178.157] on Tuesday, January 25, 2011 at 16:45:43 :
Try unscrewing the switch a little bit from the bezel. It wont move much, because the switch shank that comes through the dash is D shaped as is the hole. There is often enough slack that you can get it to move enough to loosen it, then continue to spin the bezel off with your fingers.
Tim
Follow Ups: