Posted by C. Garbee on Monday, January 08, 2001 at 3:43PM :
In Reply to: Ranger bolt pattern. posted by Cleo on Monday, January 08, 2001 at 1:07PM :
Although Advance Adapters does not make a Ranger that will bolt up to an older Dodge straight out of the box, you can get them to build you a custom box that can be mated between the stock bellhousing and transmission such as the NP420 (or similar Dodge box).
I was able to get them to build me some hybrids for use in my M37 between a Cummins 4BT and the original transmission that only required a moderate amount of machine work on my end to fit into the truck.
If you're serious about putting one into your rig, send me you email and I'll send you detailed instructions on how to get one to fit...
This board is powered by the Mr. Fong Device from Cyberarmy.com |