Posted by Rob Steller on Monday, January 08, 2001 at 1:30PM :
In Reply to: Re: Not a wise idea to machine tapers into alum rims posted by The Other Ross on Sunday, January 07, 2001 at 5:06PM :
These are pretty thick, about 1/2", so you'd need to get longer studs, as well as the correct nuts, to make it work. Seems to be some question about whether these would fit on the inside or just the outside. The offset is pretty tight for use with a standard single rim. I think the sidewalls would almost touch. I think I'll try one and see! Rob
This board is powered by the Mr. Fong Device from Cyberarmy.com |