|
|
Posted by dave horvath [12.130.9.139] on Sunday, January 23, 2011 at 14:11:31 :
In Reply to: BED SIDES posted by GREG IN MONTANA [174.39.253.155] on Sunday, January 23, 2011 at 13:38:47 :
If you are looking for bedsides to fit a 1946 WDX - 1967 WM300 Power Wagon you can use an 8' bed from a W series truck. You just need to remove the running board section in frnt of the wheel well and cut about 2" off the bottom of the bed side in front of the wheel well and bend the flange in the bottom. Several folks have done this, including Kieth in WV, and Tim H. It will look just like a third series bed. I would do this before I would ruin a nice 9' stepside bed. Or, you could by new bedsides from Matt Tisdale!