|
|
Posted by joe borruso [72.193.224.126] on Thursday, December 23, 2010 at 19:10:57 :
'67 power wagon coverted from 318-440. using factory parts for a 383 4-speed wagon ie big block bell housing w/ 2 bolt starter, oem starter & flywheel: the starter, when engaged, misses the ring gear by about 1/4 inch. factory flywheel is 14 3/4 & it looks like if it was 15 or 15 1/4 inches in diameter it would work....this set-up should bolt right in so any help would be appreciated. thx-joe
Follow Ups: