|
|
Posted by chrisnj [68.39.48.179] on Saturday, December 04, 2010 at 17:59:06 :
In Reply to: Windshield frame posted by Ang in NJ [64.12.116.76] on Saturday, December 04, 2010 at 10:54:45 :
I would cover the glass with duct tape before you take it apart, it keeps it intact for a template for the glass cutter. Soak the splits really good with PB Blaster to make them come apart easier. You will bend the frame out of shape if you don't. Use a rubber mallet (not hard plastic) and go at it slowly, just a little at a time. It will also help to run a utility knife through both sides of the channel where ever the glass sits, to loosen it up. Treasure the frame as you would the whole truck, they are expensive to replace if you bend it out of shape. Good luck...