|
|
Posted by Joe Van NY [67.242.76.232] on Sunday, October 10, 2010 at 20:51:44 :
In Reply to: Re: air impact wrenches posted by Kaegi [71.227.129.92] on Sunday, October 10, 2010 at 19:55:19 :
I have had to use 1/2, 3/4, and 1 inch in the Thruway truck shops. I like the C/N,I beleive Kobalt stuff is all Chinese. I took my C/N and opened up the internal ports and it made a noticable differance in torque. I actually did not use the 3/4 as much after modifying the 1/2. I also use a lot of Marvel mystery oil, 3/4 plumbing from the compressor,3/8 hoses and straight shop air pressure.(keep the tank drained).I never can get along with only 90 PSI except on sand blasters.
Just my cents.
Joe Van NY
Follow Ups: