|
|
Posted by terry [74.15.33.241] on Saturday, October 09, 2010 at 13:22:49 :
In Reply to: Re: Coating inside of axle housings posted by Paul(in NY) [12.64.102.109] on Saturday, October 09, 2010 at 13:12:27 :
Thanks Paul for the advice. I had a feeling I might try some expoxy primer that I have here at the house. I was not sure but hearing it worked good for you, I will give it a try to seal up the axle and carrier housings. Just have to keep it off the bearing surfaces or else!.. Terry
Follow Ups: