Posted by Tim Holloway [69.54.28.229] on Saturday, October 02, 2010 at 09:50:16 :
In Reply to: Sorry, here is the pic- posted by Doc Dave [66.82.162.13] on Saturday, October 02, 2010 at 07:45:19 :
Hi Dave,
From the picture, it looks like the reveal along the back edge of the hood gets bigger as it goes down. Adding shims (washers) under the front cab mount bolts should fix this. I had the same issue in my truck, and if you look, you will see those telltale curved scrapes on many a fender.
Pull the nuts, put a couple of jacks under the front of the cab and start lifting until the seam is parallel. Add shims to suit and crack a frosty cold one and pat yourself on the back. (Dont forget to put the nuts back on and remove the jacks before driving away!)
Tim
Follow Ups: