Posted by Will (in IL) [98.215.26.138] on Saturday, September 25, 2010 at 18:09:50 :
In Reply to: Pulling the engine. posted by Robert N. [68.4.173.19] on Saturday, September 25, 2010 at 17:57:58 :
If the shifters are off the tranny and the tranny cover out of the cab, and you have a load balancer on the engine hoist (to level and tilt the engine assembly), it will pull as an assembly just fine.
Other wise removing the tranny from the engine is a little bit of work, I used the engine hoist through the cab to lower it to the floor.
Follow Ups: