|
|
Posted by Adam [146.233.0.201] on Wednesday, September 08, 2010 at 17:32:17 :
In Reply to: Adivice & Opinions Cutting Tin posted by copey [206.80.248.44] on Wednesday, September 08, 2010 at 13:21:03 :
I use a makita jigsaw with metal cutting blades for some jobs. They do make a wide cut compared to a shear, but that is ok if you cut to the outside of the line or are going to weld it back up.. plus most of us already have a jigsaw and metal blades are cheap..