|
|
Posted by Bruce in BC [24.207.16.216] on Monday, September 06, 2010 at 19:47:09 :
It took a bit of measuring and a trip to the wreckers . I found a upper hose from a 1992 GMC diesel which was the only hose with the right diameter . After cutting up the old hose I could not quite get it to work . Bought a new one , removed about one inch from the middle , flipped around 1/2 and darn if the thing fit like it belongs there . This sounds easy but I looked at it for about 90 minutes , flipping the old and new hoses around before i was willing to try cutting up the new hose So I have a 2 piece hose on the upper end of the rad . No idea what I can get to work on the bottom . Those cummins outlets are quite big and most of the big three hoses seem to neck down at the rad.
Bruce
Follow Ups: