|
|
Posted by Clint Dixon [74.206.62.94] on Saturday, August 28, 2010 at 19:33:59 :
In Reply to: Re: OK; Could the hub be too tight? posted by rick pacholski [98.26.211.168] on Saturday, August 28, 2010 at 18:23:54 :
All the hubs and drums are interchangeable from corner to corner.
The problem arises when you have drums turned and/or balanced. This work needs to be done with the drum mounted to a hub. Then consider that set a matched pair. They should not be separated and mixed up after that. Unless down the road you go to turn and balance them again. Then you can mate any hub with any drum until after you have the work completed.
What Copey is suggesting is swapping drums for a temporary test.
Junior