Posted by Mike Hernke [63.151.218.18] on Monday, August 09, 2010 at 13:59:35 :
In Reply to: Re: Flat head help! posted by Jerry in Idaho [64.139.238.43] on Monday, August 09, 2010 at 12:24:50 :
Moving the idle screw seemed to have no effect on the vacuum but the gauge was bouncing a lot. One other thing was that I pulled the carb off of the 230 out of my M37 because I knew that carb was good and with the M37 carb I had to turn up the idle several turns to get it to idle. On the M37 engine it idled fine.
Follow Ups: