|
|
Posted by Mike Hernke [63.151.218.18] on Monday, July 26, 2010 at 18:30:08 :
In Reply to: WC53 + 4bt rad hose questions posted by Bruce in BC [24.207.16.216] on Monday, July 26, 2010 at 17:11:12 :
I bent a coat hanger to match the way I wanted the hose to run and measured the outlets with a caliper. Then the old manager at the local O'reillys (my contribution to the previous post) let me go to the back and me and my wife checked every hose and found two that were close. The mgr let me but both and return the one I didn't need. I think I cut off about half the hose but the other half worked pretty well. I have an M37 or I would try to find the part number that worked for me but I think the method might work for you.