Posted by Chriscase [76.212.164.25] on Monday, June 21, 2010 at 09:25:27 :
In Reply to: engine pre-luber on the best of page posted by Sam [74.183.244.145] on Monday, June 21, 2010 at 08:35:31 :
Put the oil in any port in the side of the block, there is a row of them. Probably 20 psi, enough to make the cold oil flow. Shut it off befroe you run out of oil, ho sense putting air in. A quart ought to do.
Follow Ups: