|
|
Posted by copey [206.80.245.102] on Friday, June 18, 2010 at 07:14:43 :
In Reply to: Re: Re-bush the rods? posted by M Fanoni [32.174.245.19] on Friday, June 18, 2010 at 00:33:38 :
The reason i have ask why is in many years of rebuilding engines i have replaced only one wrist pin > that was because it was a warranty repair and was specified by the manufacture
.what had gone wrong to cause wear on the pin itself the pin being hard and bushings in place > perhaps timing out for a great period of time and was "pounding" on the pins > both bushings and piston are softer than the . Once i saw rods in the wrong way and the oil holes didnt get oil "UP" i would be curious to why the pins are worn ,unless you have a million miler then thats a different story > please keep me posted ~ Copey
Follow Ups: