Posted by Chriscase [76.212.167.10] on Thursday, June 10, 2010 at 23:11:20 :
In Reply to: Tranny help posted by chris [69.112.140.198] on Thursday, June 10, 2010 at 22:14:59 :
Nothing in common between 3/4 and reverse.
If you remove the floor board/ "tranny cover". you might be able to lube the ends of the rods. Plus tap on the back end of them, while pulling lever to rear?
There is supposed to be plugs in the end, may need to drill a small hole, thread in a screw, and pull the plugs out before the penetrating oil can be applied.