|
|
Posted by copey [206.80.247.157] on Saturday, May 22, 2010 at 17:23:41 :
In Reply to: Re: points problem posted by Allen in CT [24.177.10.191] on Saturday, May 22, 2010 at 15:24:48 :
thought that the was no resistor and that will cook out points > i would check with a voltmeter at the coil first before you start cutting wires 9 to 10 volts is what you should have with the key on > the should be another wire called a by/for by passing the resister while cranking at the coil > this wire comes from the soleniod is ONLY live when the starter is cranked > when cranking as voltage DROPS when cranking that keeps the voltage constantly at 9 .6 volts > I would check further to see that the conversion included a 12 V coil and condenser and i would check the out put of the Generator /alternator to be safe ~ Copey r
Follow Ups: