|
|
Posted by Keith in Washington [24.41.41.111] on Monday, April 12, 2010 at 10:46:55 :
In Reply to: Radiator Question posted by Andrew Moore [170.35.224.65] on Monday, April 12, 2010 at 10:30:30 :
Take it to a radiator shop. While your at it have them check the whole thing out. You do not want to pull it out again to fix something you did not see. Soldering a radiator is not as simple as it seems. Too much heat and you unsolder other seams that you did not want to so you end up chasing leaks. Too little heat and you still have a leak.
Having them fix the problem you have should be quick and not very expensive.