|
|
Posted by michael hernke [75.207.62.139] on Thursday, April 01, 2010 at 21:54:12 :
In Reply to: Re: Hauling a Step Van posted by Marty [174.7.23.230] on Thursday, April 01, 2010 at 15:16:39 :
Okay here are the dimensions of mine which is a grumman bodied ford chassis Kurbmaster so not identical to yours. The box is 14' usable 82" wide inside, the truck is 21'9" not including the bumpers 23'7" with, the wheelbase is 13'3". The track of the dually axle is 90" tread to tread, the body is 87", I lost my help for the front but I believe without the outer rear wheel the track width is no problem. The ground clearance of the body is about 17", much more than I had thought and the overall height of the truck is 9'2". I also measured my 16' 12,000 lb bobcat trailer that I use (it is similiar to a kronkite if you have ever seen them) and the wheelwells are 13" tall the distance between the wheelwells is 81", I believe a car trailer will be a little wider between the wheelwells I know the xtra wide 7000 lb are usually 84" but most 10,000 lb + trailers are a little narrower. The trailer is parked on some unever gravel so it is difficult to measure but I would say the deck is about 20" from the road with the 9'2 truck height that would be roughly 11' total I think it would work, 16' would be a little short you couldn't balance the trailer at all and I think your truck maybe a little longer than mine. Hope this helps a bit if you need any other dimensions let me know.
Follow Ups: