|
|
Posted by Eric B. [75.42.234.151] on Tuesday, March 09, 2010 at 19:28:17 :
In Reply to: Hey, Eric B!! posted by Tom in Indiana [216.249.66.74] on Tuesday, March 09, 2010 at 16:54:21 :
Are the same on that 2wd. The doors, gauges, windshield frame, headlight buckets (you will need to change the way they mount though), seat, etc all interchange from that 2wd.
The front sheet metal, drive train, frame, etc are all different.
The cab roof is pretty much the same, but the cowl and floor are different. But the 2wd cab could be modified to fit your PW, it has been done before.
Get them both home, clean out the cabs and start measuring, you may find enough good metal in the two PW cabs to make the 2wd cab into a PW cab.
If you get the 2wd send me some pictures of it and I will try and show you some of the parts that interchange.
Eric