|
|
Posted by Chris & Carston Becker [71.20.194.224] on Monday, March 08, 2010 at 14:58:04 :
In Reply to: Re: HELP! 1948 B1 PW Clutch Problem! posted by David Sherman [24.32.202.83] on Monday, March 08, 2010 at 01:45:47 :
David,
I had them on the ramp under the lift and the new clutch pack looked the same as the old one. When I ordered it from NAPA We had to dig in the books and find the pressure plate, throw-out bearing,pilot bushing (which was wrong had to ream it out between a 1\64th and 1\32) and the clutch disk.
part number for: clutch disk is RCF446
pressure plate CA519/ca592
Both of which are now discontinued and not available from NAPA (I bought them before I knew about Vintage Power Wagons)
Chris Becker
Follow Ups: