Posted by Gary DeMoss on Sunday, October 29, 2000 at 00:23:37:
In Reply to: wiring harness/12v conversion posted by JD on Saturday, October 28, 2000 at 19:51:48:
You won't have to change any of a stock wireing harness to change from 6 v. + grnd to 12 v.- grnd.12 volt uses smaller gadge wire than 6 volt so thats not a problem.If yo want turn signals ect. precision wireing can add them.To switch to 12 volt just add 12 volt charge system,battery and lights.Put resitors on heater defroster motor and fuel gadge.Reverse battery cables and ammeter wires.You can use the 6 v starter but go easy on the horn or change to a 12 v one.John R Brillman has braded wire.