Posted by David Sherman [24.32.202.83] on Saturday, January 30, 2010 at 14:54:04 :
In Reply to: Re: Jeep belt pulley posted by Kaegi [24.113.81.122] on Saturday, January 30, 2010 at 14:42:53 :
Yes, it's an M37 I'm working on now. Somebody had turned the forward-only PTO into a rear-only PTO and cut off the shifter bracket. I took it apart, turned it back around, and made a new shifter bracket. Was glad to see the innards worked both ways. I didn't know PWs had bi-directional PTOs.
Mostly I was just thinking about whether anyone has put a jeep belt pulley on a PW. I think the jeep used a T-case PTO. Obviously an entirely different drive setup would be needed, but PTOs aren't too rare and drive lines can be made.