|
|
Posted by Vaughn [99.58.162.151] on Wednesday, January 06, 2010 at 22:03:04 :
In Reply to: I am not understanding any of this posted by copey [206.80.248.53] on Tuesday, January 05, 2010 at 21:30:09 :
Hi Copey,
The only adjustment on the PW pinion is the bearing preload accomplish by different size shims. There is no toe/heel mesh adjustment between the pinion and ring gear, only backlash. You adjust the backlash by adjusting the bearing on either side of the differential case to move the ring gear towards or away from the pinion. It's a very simple setup. The nut that holds the yoke to the pinion is torqued 180-300 feet pounds, which 150 is enough. Hope this helps a little