Hydraulic operated stock PW clutch?

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by Will (in IL) [98.215.26.138] on Tuesday, January 05, 2010 at 19:47:07 :

(The above Image is Chris NJ's, and is for reference)

I received my Hanging Pedal Assembly from Ray today and removed the through the floor brake pedal assembly from the 46 PW.

Question, has anyone installed a slave cylinder in place of the through the floor pedal to operate the stock Clutch?

It looks like I could unbolt the pedal assembly from the bellhousing (see Chris's picture above) and fabricate a bracket that would hold the slave cylinder and bolt in the pedals using those holes.

Any other ideas, or others experience?

I could leave the through the floor clutch pedal, and only run a hanging brake pedal for now, and then switch it when/if I ever re-power with a 4BT.

Will

My Power Wagons

Follow Ups:

Re: Hydraulic operated stock PW clutch? - Dana (in Lancaster) 07:15:19 01/06/2010

Re: Hydraulic operated stock PW clutch? - Daryl in Oz 01:14:05 01/06/2010

Leave the mechanical, it's simpler. - Chriscase 22:39:09 01/05/2010

Post a Followup

Name:
E-Mail:
Subject:
Message:

Optional Link
URL:
Title:
Optional Image Link
URL:

This board is powered by the Mr. Fong Device from Cyberarmy.com