Re: Retaining Nut

Posted by Will (in IL) [98.215.26.138] on Tuesday, January 05, 2010 at 15:58:25 :

In Reply to: Retaining Nut posted by M Fanoni [75.107.122.30] on Tuesday, January 05, 2010 at 15:44:08 :

If you are talking about the bearing cup backlash adjusting nut that screws in under the bearing cap, there is no torque specification.

The bearing caps are 100-120 ft.lbs., and are torqued in an order per the backlash setting.

I just now got through setting up my 4th differential, and it's getting easier!

Will

Follow Ups:

• Re: Retaining Nut - M Fanoni 16:29:21 01/05/2010
  • Re: Retaining Nut - Milo/ in/ Pa 18:36:13 01/05/2010
    • Re: Retaining Nut - M Fanoni 19:02:57 01/05/2010
      • If you have changed to 4.89's - Paul ( in NY) 19:41:23 01/05/2010

Post a Followup