|
|
Posted by John Gentry [205.188.116.76] on Saturday, December 26, 2009 at 22:35:34 :
In Reply to: Dimension up-date posted by ScottW [75.209.251.25] on Saturday, December 26, 2009 at 19:26:21 :
More additional Swivel frame Info…..The Willock unit is substantially heavier
duty than the Truckstell…. This might be because Willock manufactured Swivel units
For Medium and heavier duty truck…… I own Willock # SF-1…. It is what we reversed engineered to produce our original designed reproductions units….To give you an idea of a couple of differences, SF-1 Willock has eight inch reinforcing ˝” thick rings welded inside to attached the Shaft pivot tubes to the cross members….. This spreads the forces out over a greater area than simply welding the Pivot tubes to the vertical frame cross members…… (We use twelve “ reinforcing rings)…The shaft on SF-1 is SOLID….. not just a tube…..The overall mass is greater on the Willock…… Hope this provides a bit of additional Info…..
www.gentrymw.com
Follow Ups: