|
|
Posted by Tom Petroff (IL) [205.188.116.76] on Sunday, December 20, 2009 at 17:38:16 :
In Reply to: So with all this talk of pto shafts....... posted by Nick [64.13.117.14] on Sunday, December 20, 2009 at 17:16:57 :
Yes you need a sliding yoke for the splined end. Other than that it sounds like you have everthing else needed.
The disk with the lock screw goes just ahead of the sliding yoke so if the sheer pin breaks the shaft can't walk off the winch shaft.
TGP
Follow Ups: