|
|
Posted by Kaegi [24.113.81.122] on Saturday, November 07, 2009 at 19:15:23 :
In Reply to: Re: I MEANT 201 cid, posted by Dave Royal [75.81.205.43] on Saturday, November 07, 2009 at 18:13:35 :
I would measure the stroke and see if someone put a 230 crank in maybe. then you could bore and sleeve it to fit 230 pistons. 210 bores are 3.125 and 230 bores are 3.250. 201 stroke 4.375 same as 217. 230 stroke is 4.625