|
|
Posted by David Sherman [24.32.202.83] on Thursday, October 15, 2009 at 14:17:08 :
In Reply to: Re: Miller welder FREE... posted by David N. Lundstrom [216.235.160.193] on Thursday, October 15, 2009 at 13:46:08 :
Wow, Dave, I'd given up on that. I'm just getting back into putting the Tucker back together for winter. We finally had some rainy weather so I took my spare axles over to a shop that had a 40 ton press and got the shafts and hubs separated so now I can put new bearings and seals on and get the rear end back together. I lucked out having a usable axle shaft and hub in my bone yard. I still need to take off one front pontoon and change the seal because when I filled up the pumpkin, all the oil ran right out through that pontoon even without driving it anyway. Anyway, at that point the only thing it'll still be needing is an air cleaner, and you elbow will provide the missing link for that. I can't even remember if I sent you any money or not for that elbow, but if I still owe you anything, let me know.
Unfortunately today I'm stuck replacing front wheel bearings in my honda car, which isn't near as much fun as working on the Tucker. Last week we had lows down below 10 degrees, so winter is clearly on its way. No snow yet, fortunately.