|
|
Posted by Spence [66.44.240.51] on Saturday, September 26, 2009 at 13:16:42 :
In Reply to: Re: Booster vacuum line pic #2 posted by Steve Simon [205.188.116.76] on Saturday, September 26, 2009 at 08:08:50 :
I tend to agree with Clint. The "factory" location would not interfere with the Positive Crankcase Ventilation system. The rubber hose may not be suited for vacuum. When the hose gets hot from engine heat, it may collapse and reduce braking power. If you use any rubber hose, it MUST be designed for vacuum use. This type of hose has a spiral wire embedded in it to prevent collapse. Also check and make sure that the line has a check valve installed and that is in working order. The vacuum chamber on the booster "stores" vacuum and will operate when not much vacuum is avalable from the engine.
Check out my booster page at the link for additional info. (Thanks to Phil Street for hosting my web page on his t137.com site!)
Spence
Email me if you want some more photos or have any further questions that I can help you with.