|
|
Posted by Keith in Washington [24.41.41.111] on Friday, September 04, 2009 at 11:04:08 :
In Reply to: Transfer case levers and shaft posted by Brian Holt [64.180.205.232] on Thursday, September 03, 2009 at 12:43:18 :
As stated below replace the bushings. But also replace the shaft that they are on. It is simply a piece of round stock welded to the adapter plate. Mine still rattled until I replaced this shaft.
Any local machine shop can press in the bushings. It might be hard to find a shop to replace the shaft for a reasonable price. Too small of a job for most. Not hard to make one yourself if you have a welder or a friend with one.
Follow Ups: