|
|
Posted by copey [206.80.248.219] on Monday, August 31, 2009 at 03:52:38 :
In Reply to: OT Diesel Engine Question posted by David Bizzell [66.88.101.130] on Sunday, August 30, 2009 at 21:18:37 :
No need to pull the injectors > just run the engine and and loosen the fuel line to each injector ( just like shorting out a plug wire on a gas engine) one at a time till you find the missing cylinder(s) then dertermine if its one cylinder or two side by side then pull it down > if its just a steady miss there is a possibilty of a bad injector if not then open the rocker cover check the valve operation if valve train are good pull head ~ Copey
Follow Ups: