Posted by Paul on October 08, 2000 at 12:45:40:
In Reply to: Re: Front spindles posted by Todd Asnicar on October 07, 2000 at 21:26:02:
{{Could anyone tell me the part numbers for spindles and hubs for my '68 W200?}}
I'm afraid I don't have the part numbers but I can tell you the interchange for this truck. You can use the spindle off of a 1961-68 W100, W200 with either the 3000 pound or 3500 pound axle and also off an International pickup or Travelall from 1966-68 with 4X4.
On the hub, I'm assuming you have single rear wheels and don't have a crew cab. The crew cab is different. The hub isn't listed separately. The hub and drum assembly can be used off 1959-74 conventional cab W200. There are some things to remember. After 1972, only RH threads were used whereas left and right were used before then. This is for 12 1/8X2 brakes.
One more thing to keep in mind, since the drum is considered part of it, you have to swap drums marked "KH" and "MW" in pairs only.