|
|
Posted by Tim Holloway on Sunday, March 22, 2009 at 20:49:28 :
In Reply to: Re: New Hubs/installation posted by NjJosh on Sunday, March 22, 2009 at 20:28:57 :
Josh,
These are for a Flat Fender Power Wagon. The installation is about as simple as can be. One removes the drive plate off the end of the axle, and then slips the lock-out hubs onto the splined end of the axle (with a new gasket) and tighten it down. No cutting involved, unless you had cabbage for dinner the night before!.
Tim
Follow Ups: