|
|
Posted by George(AB) on Tuesday, March 17, 2009 at 00:13:40 :
In Reply to: Re: Front is back together with the ARB installed posted by Will (in IL) on Monday, March 16, 2009 at 12:18:55 :
Good on ya Will. not many people tackle diffs.
I did the first Falcon diff that came into the dealership (back in the day),, I read the pinion markings, installed the called for shims & got a pattern the same as the big rear ends. The Falcon FSM said different so I went from "0" up to far too much .002" at a time & yes the best pattern I got was the origional. It turned out it was impossible ,,, the pic in the book was incorrect, & from then on I used the large diff markings with no problems. I learned the hard way,, got paid 4.0 flat rate hours for a job that took over two days,, makes a guy remember haha