|
|
Posted by Vaughn on Sunday, March 15, 2009 at 22:55:27 :
In Reply to: gen charging high like vaughn's post. posted by T-roy on Sunday, March 15, 2009 at 17:18:00 :
Start it up at night in a dark place and have a helper watch the wires. From the ignition switch, pull push wires and watch for sparks. Do the same on wires from the gen. to the reg., coil to dist. You might be able to isolate quickly which wire is causing the problem. If this produces no results, take the gen. apart and the field winding out. Look at the areas where the windings lay against the gen. housing for bare copper metal. You might be able to buy shellac at NAPA to repair the area.
Follow Ups: