|
|
Posted by Nick on Friday, March 13, 2009 at 21:38:52 :
I was installing my brake and clutch pedals. Once I got them in, I realized that there is alot of play in the clutch pedal, like the mount that hangs down is oblonged from alot of use.
And the arm from the clutch pedal to the arm that goes into the clutch was not lining up. So I tried to adjust the adjusting nut; seized. So I was gonna take the lever off and snaped the head off the bolt. Now that arm is on the rod that goes into the clutch.
If i were to take the two bolts off the side of the housing, will that rod pull out of the clutch so I can try to get the snapped bolt off? Im noticing that all the shafts are worn and I should replace all the shafts and levers since they are all egged out.
Im noticing in the parts manual, that inside the flange, there is a rod with a key, but not sure if it will come out like I need it to.
Guess I'll be looking for new shafts and a bracket for the clutch pedal.
Thanks
Nick
Follow Ups: