|
|
Posted by Clint Dixon on Friday, December 05, 2008 at 15:22:45 :
In Reply to: Re: Where should temp needle be on a 251 CID posted by Vaughn on Friday, December 05, 2008 at 11:48:05 :
I must disagree Vaughn.
If the ambient temperature is 30F degrees below zero, that would mean that the Power-Wagon engine was designed to run at 70F degrees or lower. That would be WAY to low for the engine, regardless of the ambient temperature.
A 180 degree themostat is a 180 degree thermostat. It does not detect ambient temperature and then adjust itself to regulate coolant temperature to be 100 degrees or less above that.
Junior
Follow Ups: