Posted by James Fuller-Devine on August 23, 2000 at 19:20:49:
In Reply to: Re: 1963 D200 Questions posted by James Fuller-Devine on August 22, 2000 at 15:17:15:
Vince,
Well I was supposed to be done last night. The rebuild kit for my master cylinder included a piston that was a good deal shorter than the original!! Just gonna use my original piston. Also, it seems that the push rod connecting bolt on my truck and one in the junk yard were on backwards with the pushrod ring riding on the threads!! The bolt should fit into the ring all the way!! So now the 3/4" end is on the passenger side and the 5/8" end is on the drivers side. This might mimic a clutch problem!! I put a bit of 90 weight oil for lube in the ring. Hope this helps.
James Fuller-Devine