Posted by Vaughn on August 30, 2000 at 00:03:14:
In Reply to: Filling the Trans with oil/looking for a carb rebuilder posted by Mark Davis on August 29, 2000 at 10:12:43:
I believe to remove the PTO, you will need to remove your floor covers, bolts from the trans mounting ears (bellhousing), and rotate your trans to the left, making SURE it does not pull back and out of the bellhousing, then unbolt the PTO, rotate back and button it up.
Don't use cork, go down and buy a nice gasket FEL-PRO#55379 or VICTOR from NAPA.
Go to Olive-Drab.com There are excellent step by step procedures to rebuild your carb
Is your PTO casting case number 12525?