Posted by John R Dunn on Tuesday, July 22, 2008 at 13:05:09 :
In Reply to: Re: John posted by John in NH on Tuesday, July 22, 2008 at 12:35:41 :
John,
You might give some thought to using the 1/4 inch line from the master cylinder to the tee fitting on the axle housings. Use the 3/16 from there to each caliper.I didn't see a problem using non-armor line unless you plan on really doing some very serious off-road work. I got all my line and fittings from Fedhill. If you are also installing Ray's power steering kit, the big master cylinder will not fit. You will have to engineer a new mouunting system for ti.
Follow Ups: