Re: seat belts

Posted by Paul (in NY) on Saturday, May 10, 2008 at 15:49:49 :

In Reply to: seat belts posted by copey on Saturday, May 10, 2008 at 13:54:59 :

I use Lap/shoulder belts in all my trucks. During the build, I cut a hole in the roof right over the B Post. I then drop a piece of steel .500" thick x 2.0" wide down into the full length of the B Post. Its then welded in place. This serves as a perfect anchor point for the shoulder belts. Finally the hole in the roof is welded closed and finished. This works great on Power Wagons. My M37 is the same concept except the Shoulder anchor is 2x2x.250" square tube also welded into the B Post.

Paul

• Restoration Alley

Follow Ups:

• Re: seat belts - Kevin 16:00:39 05/10/2008
  • Re: seat belts - Keith in Washington 10:54:53 05/11/2008
    • Re: seat belts - copey 11:45:18 05/11/2008
      • Re: seat belts - MoparMogSteve 16:13:32 05/11/2008
        • Re: seat belts - Paul (in NY) 16:18:33 05/11/2008
      • Re: seat belts - Kevin in Ohio 12:09:32 05/11/2008
        • Re: seat belts - copey 17:53:23 05/11/2008
          • Re: seat belts - M Fanoni 21:48:20 05/11/2008
          • Re: seat belts - MoparMogSteve 21:16:18 05/11/2008

Post a Followup