|
|
Posted by Dan Lowe on Wednesday, January 30, 2008 at 00:08:16 :
In Reply to: Re: Steering Wheel Shaft Taper posted by Marty on Monday, January 28, 2008 at 15:42:10 :
I am trying to make an adapter so the steering wheel will fit onto a 3/4" shaft with the last 1.25" turned down to 5/8" with the final 3/8" threaded. The od of the adapter would match the taper of the steering wheel and the id would be 5/8". I just need to know the taper of the steering wheel.