Posted by Fleabag on Sunday, December 30, 2007 at 15:43:18 :
In Reply to: Re: 4bta setting on new mounts posted by Vaughn on Sunday, December 30, 2007 at 11:51:30 :
Vaughn, Fleabag here, I dont know how it sat in the bread van, did not realy pay that much attention. It is at a 4 degree tilt back toward the transfer case, as the frame is setting there on my jack stands the transfer case also has a 4 degree tilt back toward the rear. The yoke on the tranny is setting about 1/2 inch higher on center than the yoke on the transfer case. Thanks Duane
Follow Ups: