Posted by dave horvath on Monday, October 08, 2007 at 22:14:58 :
In Reply to: Dome light install? posted by galen on Monday, October 08, 2007 at 19:58:20 :
Check out picture #34 on my website http://www.imageevent.com for the 1950 PW restoration. Remove the chrome bezel and lens. The dome light housing is rectangular. Cut a rectangular hole above the rear window trim. The short ends of the dome light housing have metal tabs that sandwich the cardboard headliner on each end. Run a ground wire from the light to the metal cab upright behind the seat. You may even see the hole from the original ground wire. Run the lead wire to the "A" terminal on the Headlight Switch.
Follow Ups: